I recently came across this article, on This Old House and felt it was worth a share! Much valuable insight and information regarding types of vinyl siding and choosing the right vinyl installation for your home can be found in this worthwhile read. Enjoy!
The Benefits of Vinyl Siding
There are few subjects in the whole arena of residential construction products that draw battle lines as sharply as vinyl siding. Proponents harp on the fact that it never needs painting, while its detractors insist that houses should never be covered with anything but real wood.
As a building material, vinyl siding is relatively new — it was introduced in the late 1950s as a substitute for aluminum siding. But its reputation was tarnished in the early days when it cracked, faded, buckled, and sagged.
Ongoing changes in the product’s chemistry and installation techniques have improved its performance and furthered its acceptance by builders and homeowners.
In fact, vinyl has captured 32 percent of the U.S. siding market for new homes, with no end in sight to its growing popularity. The reason, in part, is because it’s often (but not always) cheaper than red cedar or redwood and takes less time to install.
A mid-grade vinyl costs about $1.60 per square foot to install, not including the necessary trim pieces, while the installed price of mid-grade cedar clapboard, exclusive of trim and paint, is about 2.5 times higher. (Some premium vinyls cost about the same as the best grade of cedar, but the installed cost is still lower because it goes up faster and doesn’t need painting.)
All Plastic Siding is Not the Same
Vinyl is a polymer formed during a chemical do-si-do between ethylene gas and chlorine, which produces a fine white powder called vinyl resin. When it’s melted and mixed with different additives, the resulting compound can be as rigid as pipe, as supple as a shower curtain, or durable enough to survive the heavy foot traffic on a kitchen floor.
Not Entirely Maintenance Free
To keep vinyl siding looking its best, it should be washed periodically to remove the mold, mildew, dirt, and chalky oxidation that collects on the surface. Tom uses a soft-bristle brush and a bucket with a 30/70 mix of vinegar and water. (If that doesn’t do the job, the Vinyl Siding Institute suggests mixing 1/3 cup laundry detergent, 2/3 cup powdered household cleaner, 1 quart liquid laundry bleach, and 1 gallon water.) He just brushes it on, working from the bottom up, and gently hoses it off. Tom discourages homeowners from using a power washer on their siding; the high-pressure equipment is likely to drive water behind the panels.